Thursday, December 20, 2018

How the Dust Mask Fit Testing Works



In order for you to have the full protection of the Dust Mask, it’s necessary to have it fit tested. This will ensure that the mask will have a perfect fit on your face and that no leaks will be present that could affect the masks’ ability to keep you from breathing in potentially harmful contaminants.

When you wear a respirator, it’s essential that you follow the manufacturer’s instruction on how to wear it right. A guide is always packed together with the mask. In order to make sure that you have the right mask to protect you, you would need to undergo fit testing.
If your work involves you being exposed to an extreme amount of dust and airborne contaminants, you definitely should use a respirator. Doing so will help you decrease your risk of inhaling biological hazards and developing respiratory illnesses.

Fit Testing Procedure

Fit testing is a standard safety routine that is required by the Occupational Safety and Health Administration to be performed on workers who are required to wear a respirator mask on the job. Since respirators can only do its job when it’s worn properly, this requirement is definitely a must.
.Here’s how fit testing of the Dust Mask works:

Step 1. Before the fit test proper is done, the wearer is required to consult with a medical professional for evaluation. If there is a YES in the answers to the questions, a person will not be allowed to do fit testing.   

Step 2. It’s important to note you are not allowed to eat, drink, and chew a gum 15 minutes prior to testing.

Step 3. After you’ve been briefed with the first two steps, it’s time to move to the sensitivity testing or the taste threshold screening. During a step, you will be asked to wear a testing hood that will create a proper testing environment. With an open mouth and the tongue slightly extended, a saccharine aerosol will be added to the hood and should the wearer taste any sweetness, he/she should report it immediately to the person initiating the test. He/she is then required to remove the mask and rinse his/her mouth with water before continuing with the fit testing.

Step 4. During this step, the wearer will be asked to don both the respirator and the testing hood. The saccharine aerosol will be introduced to the hood again every 30 seconds (full amount on the first time and then half the original amount on the proceeding times). During the introduction of the aerosol, no sweetness should be detected. An effective mask should be able to filter out all the aerosol particles. If sweetness is detected proceed to step 5.

Step 5. If the wearer tastes sweetness while wearing the Dust Mask, the technician should be notified immediately and the testing hood along with the respirator mask should be removed and the mouth should be, again, rinsed with water. This signifies that the respirator that was used was not the right fit. Another size of respirator will then be used and fit testing will be done again.

When it comes to your safety, it’s better to be sure that you are equipped with the right type of protection. When you’re working, be sure to have a dust mask ready at hand at all times. Most importantly, don’t forget to switch to a new one every now and then.



Monday, December 17, 2018

Top 5 Tips on Wearing a Respirator


Did you know that respiratory protection has been one of the top most-violated OSHA standards? Most companies fail to address this problem for the sole reason of not properly having a written respiratory protection program for their employees to follow. As a result, they become exposed to certain airborne particles that could endanger their well-being.
Makeshift masks such as bandanas and handkerchief are just not enough to protect people from smoke and tiny particulates in the air – there is no denying of that fact. This led to health and environmental scientists to the creation of dust masks that provide a comprehensive protection for outdoor workers and emergency responders. In addition, certain organizations and government units have also proposed tips and advice in effectively wearing a respirator mask.

Here are some of their suggestions:

Tip #1: Go for NIOSH Approved Masks

There are a lot of masks to choose from out there but the NIOSH approved ones are usually the most effective when it comes to blocking out minute particles in the air. For instance, the N95, N99, and N100 masks are the most common in the market. These masks have straps that make sure it will be perfectly mounted on your face.

Tip #2: Be Sure that the Masks Fits Your Face Perfectly

Having a mask that’s snug around your nose creates a seal on your face and eliminates the possibility of smokes or airborne contaminants from leaking into the inside of your mask. Most stores that sell masks allow a test fit in order to make sure that the mask will be the right fit for you before you make the purchase. A loose mask will simply do you no good when it comes to respiratory protection.

Tip #3: Make Reading a Habit

Masks usually come with a complete user’s guide or instructions. Reading the instruction beforehand pays since it helps the user’s determine which situations the masks are perfect for. It also indicates the proper way of wearing the mask which can help the users maximize the benefits of wearing the equipment.

Tip #4: Get Rid of Your Full Beard When Wearing a Mask

One thing that limits the efficiency of wearing a respirator mask is when the users are wearing a full beard. OSHA recommends wearing dust masks while clean shaven since facial hair can come between the sealing surfaces thus hindering a perfect fit and increasing the risk of breathing in dust particles.

Tip #5: Change Your Mask Frequently

Disposable respirators, such as the N95, N99, and the N100 are designed for single-use only. This is because the filter in the respirator masks have become clogged up from the day’s use and protection against harmful particulates become less efficient and it’s possible that breathing can become difficult. So when you’re done using the mask, it’s better to toss it out and use another one the next day.

One of the best ways to ensure that our health stays at its best is through wearing protective clothes and gears. Keep yourself protected. Follow these tips to ensure that you’re maximizing the effectiveness of the dust and respirator masks.  





Monday, December 10, 2018

How to Keep Yourself Protected from Airborne Diseases



Did you know that you could still catch airborne diseases even if you’re vaccinated? This usually happens when the bacteria or virus that has been floating in the air becomes inhaled by a person. When these microorganisms get inside you, they will take up residence within your body and eventually cause an infection which could put the person’s health at risk.
Because these microorganisms are basically weightless and invisible, they get carried away by air easily making it harder for them to control. While our immune system keeps us protected from the inside, there’s not a thing that keeps us protected from the outside. That’s why even if we drink enough vitamins to keep those micro bugs away from us, we are still not free from the illnesses floating in the air.
However, there are some things we can do to ensure that we are well protected, and we can avoid the horror that comes with catching an unwanted infection. If you want to keep yourself or your family safe from the particulate matter that’s floating in the air, here are some things you can do to do just that:

    1. Wash Your Hands

This is probably the most common precaution to take in order to avoid the spread of germs. The CDC recommends that each person should scrub for at least 20 seconds and wash using clean, running water. Remember to keep doing this after you take out the trash or feed your pet since it’s in those two activities that bacteria and germs are most commonly contracted.

    2. Use Antiseptic Spray

Antiseptic sprays can do a lot in disease prevention. It’s an effective way of killing off or getting rid of bacteria in any surfaces or even in the air and the best thing about it is that it lasts for a maximum of six hours. Having an antiseptic spray at hand at all times is one of the easiest and most affordable ways of protecting yourself from germs that might be hanging out in the air.

    3. Use an Air Purifier

Air purifiers are also a great way to keep airborne particles from entering your system and causing an infection. They have the ability to remove airborne particles as tiny as 0.3 microns such as viruses or bacteria. Be sure to keep your house well ventilated to make the most out of the effect of the air purifier. The well-ventilated your house is, the more efficient the air purifiers become.
       

     4. Wear a Facemask

Facemasks are a very important piece of equipment when you’re looking to keep yourself from contracting illnesses. This is especially useful when your job requires you to work in close proximity to infected people such as in a health care setting. Just make sure that it’s a proper fit so that you can be fully protected.

How the N95 Particulate Respirator Help You Prevent Airborne Diseases

With the growing concern of health risks relating to particulate matter these days, providing an equipment that can protect the people against diseases and illnesses has been one of the top priorities of the health advocates. The creation of the N95 dust masks has proved to be extra helpful in this matter.

Since the mask can provide full-protection, health organizations have encouraged people to have one at hand at all times. The N95 can protect each person from inhaling particles as small as 0.3 microns by effectively blocking it out preventing the user from inhaling it. It’s no wonder why it has become so popular these days.
So if keeping yourself safe from disease is your topmost priority, it’s probably best to have your hands on one of the best N95 respirators in the market.

#diy #dustmask #respirator #dust #dustmasks


Tuesday, December 4, 2018

Frequently Asked Questions About Disposable Dust Masks or Respirator Masks



Frequently Asked Questions About Disposable Dust Masks or Respirator Masks. Perfect fit, efficient protection and proper evaluation of masks. Some of the basic keys in keeping your employees protected. From the harmful effects of fumes and dust around the workplace. A lot of people do not know this. As a result, the facts get all mixed up sometimes and the users tend to become confused about what to do and what not to do.
Over the years, questions about disposable dust facemasks and respirators have been raised. To clarify all the confusion. To answer some of it, here are some commonly asked questions about dust or respirator masks:
  • What are respirator masks?

A respirator mask is a protective facepiece that can help shield users from hazardous particulates. The N95 facemask is a kind of respirator that can provide protection against 95% of airborne particulates down to 0.3. However, these masks cannot protect against gases and smokes. They can provide protection against the particles carried by smokes produced by a wildfire.
  • How do you know which masks are approved and unapproved?

Since masks come in various types. Some masks may be mistaken as approved when in fact, they aren’t. There is, however, a way of knowing for sure. An approved dust or respirator mask is usually has a “NIOSH Approved” stamp on it. The N95, N99, and N100 dust masks are examples of approved disposable respirator masks.
  • Do I need a fit test?

Employers are required to do a fit testing for the approved masks that their employees are going to use. This is to make sure that a particular respirator will provide a perfect fit and seal to your face. It’s also important to remember that when you’re fit testing. It’s necessary to do it when you don’t have a full facial beard since it can have an effect on the sealing on your face.
Fit testing should also be repeated after two years, according to OSHA’s standards or when a user went through a significant change his or her face shape that may be due to weight loss/gain or broken bones.
  • What do I need to do before fit testing?

Before fit testing, the users are advised to do the following:
  • Not to consume or chew anything (including gum) 20 minutes before fit testing except for water.

  • Shave beard (if there are any) to ensure a perfect seal on the face.

  • When should dust and respirators be changed?

The obvious indication that your respirator is worn out is when it’s damaged and it suddenly does not provide an effective seal on the face. Another indication is when it becomes visibly dirty or when it becomes wet and contaminated with bodily secretions and fluid (i.e. blood, nasal secretions). It’s also important to make sure that you can still properly breathe through the mask, if not, then you might need to dispose of it. A shorter and easier way to remember when your respirators need replacing is through the 3 D’s: Dirty, Damaged, and Difficult to breathe through.
Ensuring a safe workplace for you and your employees is one way of increasing your productivity. Which is why dust masks are an important piece of protective equipment to have especially if you’re constantly exposed to a variety of dust and other airborne particles. Having a NIOSH Pocket Guide ready at hand can also be helpful so you can be informed of the extent to which your mask can provide protection.

#diy #dustmask #respirator 

#dust #dustmasks #dustmaskselfie #dustmaskneeded #woodworking #getdirty #doityourself #handmadepage #homeowner #homeowners #design #painting #construction #carpenter #framer #contractor #subcontractor #exterior #interiordesing #luxurydesign #interiordesign


Saturday, December 1, 2018

Dust Masks and Respirators: Just How Effective Are They?


Dust Masks and Respirators: Just How Effective Are They? Facing the dangers of the world outside our house is inevitable. Each day, the pollution gets so much worse. This leads people to seek protection in the form of dust masks.
A lot of researches have shown that exposure to dust and other potentially toxic airborne particulates could have adverse effects on the health of a person – especially the lungs, heart, and even the brain. 

As a result, the healthcare system had extended their efforts in seeking a more effective alternative in shielding people from harmful particles. Environmental organizations have played important by establishing national programs and celebrations that aim to reduce urban air pollution and its negative effects on the health of the community.

 The Use of Filter Masks in Preventing the Effects of Air Pollution


Various types of dust masks have started emerging on the market today with particulate respirator masks topping the charts. These face masks are designed to protect the general public from dust, allergens, pollutants, pathogenic organisms, and other particles down to 2.5 microns in size.

The N95 facemasks is a type of particulate respirator with a protection factor 5. This means that it can block out 95% of air particulates that might compromise the health of a person, assuming that it fits the user’s face perfectly when worn.
With all the facts presented, still, one specific question continues to bug the minds of the people: Just how effective are these particulate masks?

 The Effectiveness of Dust Masks Tested by Research


Two researchers in China tested the effectiveness of dust masks in protecting the people. Subjects were made to wear the N95 facemasks while walking on the streets of Beijing. In their results, they found out that people who were wearing the N95 facemasks were reported to have lower blood pressures and in the participants with heart problems, blood flow, and oxygen delivery through the body system was improved.

This result led the researchers to believe that wearing the mask could have a positive effect on the health of a person since they were less exposed to air pollution. However, they are continuously urging environmental scientists to improve and continue doing researches in this subject to support the claims.

The N95 Particulate Respirator is one of the top performing dust masks to date. With its ability to filter out up to 0.3 microns of particles, you’ll be sure that you will be protected from the adverse effect of air pollution including harmful gases. It’s also NIOSH approved which means that it’s perfectly safe and efficient.


There is “one size fits all” in respirator masks. In fact, there are various types of these masks depending on their assigned protection factor (APF). If your primary concern is to block out toxic chemical fumes and particulates in the air when working at your workshop or prevent yourself from inhaling dust particles when you’re doing a general cleaning in your home, then the particulate mask is the right choice.